Περιγραφή

Συγγνώμη,αυτή η εγγραφή είναι διαθέσιμη μόνο στα Αγγλικά Αμερικής. For the sake of viewer convenience, the content is shown below in the alternative language. You may click the link to switch the active language.

Plug-N-Play Connector

C02 camera features a JST-0.8 connector, special design in plug-and-play, makes it easy to install without soldering. Suitable for Cetus seris drones, BETAFPV F4 1S AIO FC, BETAFPV M03 VTX, and NBD BeeBrain flight controllers.

Bullet Points

• Miniature, and lightweight design, weight at only 1.4g. Best match with 5.8G A01 VTX on micro whoop drone.
• 1200TVL resolution and 1/4″ CMOS sensor ensure a high-quality and clear image
• Global WDR camera, 16:9 aspect ratio, shoot clear dynamic image even in low light condition
• 2.1mm lens, FOV 160° beyond the wide-angle for recording more wide and beautiful scenes
• The package comes with an injection molding canopy, more durable, which is the best combo with C02 camera

Specification

• Item: C02 Camera
• Image Sensor: 1/4″ CMOS Sensor
• Horizontal: 1200TVL with Global WDR
• Signal System: NTSC
• Lens : 2.1mm(M8) FOV 160°
• S/N Ratio: >50db
• Electronic Shutter Speed: Auto
• Auto Gain Control (AGC): Auto
• Min. Illumination: 0.01Lux@1.2F
• D-WDR: Auto
• Day/Night: Color
• Power: DC 3-5.5V
• Current: 110mA@5V / 120mA@3.3V
• Housing Material: ABS
• Dimension: 13*11mm
• Net weight: 1.4g

Package

• 1 * C02 FPV Micro Camera
• 1 * Injection Molded Canopy
• 1 * 1/4” Camera Mounting hardware

Επιπρόσθετες Πληροφορίες